Estado de Disponibilidad: | |
---|---|
The GS type pulling tool is used to pull inner fishing necks, it can be converted to be an upward shear and releasing tool.
GS type pulling tool is designed for the setting and retrieval of items with type internal fish neck profiles. Downward jarring will shear a pin to allow the release and recovery of the GS to surface.
Size | Actual OD | Fishing neck | Connection |
2″ | 1.81″ | 1.375″ | 15/16″-10UN |
2-1/2″ | 2.25″ | 1.375″ | 15/16″-10UN |
3″ | 2.72″ | 2.313″ | 1-1/16″-10UN |
3-1/2″ | 3.11″ | 2.313″ | 1-1/16″-10UN |
4″ | 3.62″ | 2.313″ | 1-1/16″-10UN |
5″ | 4.5″ | 3.125″ | 1-1/16″-10UN |
6″ | 5.56″ | 3.125″ | 1-1/16″-10UN |
Note: More customized parts are available upon request.
The GS type pulling tool GS type Pulling Tool incorporates several unique features compared to most industry standard GS type pulling tools. These features include the unique feature for integral re-arming and shear pin alignment. The design also includes a positive disengagement mechanism to remove the GS from tools at surface without compromising the strength of the GS skirt.
1. After disassembling the tool, inspect the damages of all parts and change the damaged parts.
2. While assembling the tool, the thread surface shall be painted with a thin layer of grease.
3. After assembly, the connection threads of fishing neck shall be protected with thread protector and marked for standby application.
The GS type pulling tool is used to pull inner fishing necks, it can be converted to be an upward shear and releasing tool.
GS type pulling tool is designed for the setting and retrieval of items with type internal fish neck profiles. Downward jarring will shear a pin to allow the release and recovery of the GS to surface.
Size | Actual OD | Fishing neck | Connection |
2″ | 1.81″ | 1.375″ | 15/16″-10UN |
2-1/2″ | 2.25″ | 1.375″ | 15/16″-10UN |
3″ | 2.72″ | 2.313″ | 1-1/16″-10UN |
3-1/2″ | 3.11″ | 2.313″ | 1-1/16″-10UN |
4″ | 3.62″ | 2.313″ | 1-1/16″-10UN |
5″ | 4.5″ | 3.125″ | 1-1/16″-10UN |
6″ | 5.56″ | 3.125″ | 1-1/16″-10UN |
Note: More customized parts are available upon request.
The GS type pulling tool GS type Pulling Tool incorporates several unique features compared to most industry standard GS type pulling tools. These features include the unique feature for integral re-arming and shear pin alignment. The design also includes a positive disengagement mechanism to remove the GS from tools at surface without compromising the strength of the GS skirt.
1. After disassembling the tool, inspect the damages of all parts and change the damaged parts.
2. While assembling the tool, the thread surface shall be painted with a thin layer of grease.
3. After assembly, the connection threads of fishing neck shall be protected with thread protector and marked for standby application.